Instructions and Recommendations for Manuscript Preparation

  1. General Provisions

The scholarly journal O‘zbekiston arxeologiyasi (Archaeology of Uzbekistan) accepts original research articles on the archaeology of Uzbekistan and Central Asia, ancient and medieval history, anthropology, numismatics, epigraphy, archaeozoology, archaeobotany, historical geography, restoration and conservation of archaeological sites, and the application of natural-science and digital methods in archaeological research.

Articles are accepted in Uzbek, Russian and English.

A submitted manuscript must:

  • contain the results of independent and completed research;
  • correspond to the thematic scope of the journal;
  • not have been published previously, either in full or in part;
  • not be under simultaneous consideration by another publication;
  • comply with the standards of research and publication ethics;
  • contain correctly formatted references to the sources and literature used.

Materials that have previously been published in full or in part, or that have simultaneously been submitted for consideration to other scholarly publications, may not be submitted to the editorial office.

The author is responsible for the reliability of the data presented, the accuracy of citations, obtaining permission to publish illustrations and other third-party materials, and compliance with copyright.

Manuscripts that do not meet these requirements may be returned to the author before being sent for scholarly peer review.

  1. Materials Submitted to the Editorial Office

For an article to be considered, the author must submit:

  1.  the article text in Microsoft Word DOC or DOCX format;
  2.  illustrations as separate files;
  3.  a list of illustrations and figure captions;
  4.  information about the author or authors in Uzbek, Russian and English;
  5.  an Author’s Declaration;
  6.  a Licence Agreement;
  7.  information on sources of funding;
  8.  a statement declaring the presence or absence of any conflict of interest;
  9.  information on the use of artificial intelligence tools;
  10.  information on each author’s contribution, for multi-authored articles.

Where there is more than one author, one author must be designated for correspondence with the editorial office.

  1. Article Structure

The manuscript must be arranged in the following order:

  1.  UDC index;
  2.  article title;
  3.  surname, given name and patronymic of the author or authors;
  4.  affiliation of each author;
  5.  ORCID identifier;
  6.  email address of the corresponding author;
  7.  abstract;
  8.  keywords;
  9.  main text of the article;
  10.  acknowledgements;
  11.  funding information;
  12.  authors’ contribution statement;
  13.  conflict-of-interest statement;
  14.  statement on the use of artificial intelligence;
  15.  list of references in the original scripts;
  16.  References — a bibliographic list in Roman script for sources written in Cyrillic and other non-Roman scripts;
  17.  list of abbreviations;
  18.  list of illustrations;
  19.  information about the authors in three languages.
  1. Sample Formatting of the Beginning of an Article

UDC 902/904

A MODERNISED SYSTEM FOR THE TECHNO-TYPOLOGICAL ANALYSIS OF LITHIC INDUSTRIES

Baxtiyor Kurbonovich Saifullaev

  1. Ghulomov Samarkand Institute of Archaeology, Samarkand, Uzbekistan
    E-mail: ________
    ORCID: ________

Abstract. Text of the abstract in English.

Keywords: Central Asia, Uzbekistan, Palaeolithic, lithic industry, typology, technological analysis

After the article text, the title, abstract, keywords and author information are provided in the other two languages.

  1. Article Title

The title must:

  • accurately reflect the topic and subject of the research;
  • be informative and concise;
  • correspond to the content of the article;
  • contain no unjustified abbreviations;
  • not be formulated too broadly;
  • where possible, indicate the site, region, chronological period or research problem.

The title is submitted in Uzbek, Russian and English.

It is not recommended to type the entire title in capital letters in the submitted file. The final formatting of the title is carried out by the editorial office.

  1. Author Information

The full names of the authors are provided after the article title.

In Russian

Сайфуллаев Бахтиёр Курбонович — доктор исторических наук, профессор, ведущий научный сотрудник Самаркандского института археологии имени Я. Гулямова, Самарканд, Узбекистан; e-mail: ________; ORCID: ________.

In Uzbek

Sayfullayev Baxtiyor Qurbonovich — tarix fanlari doktori, professor, Y. G‘ulomov nomidagi Samarqand arxeologiya instituti yetakchi ilmiy xodimi, Samarqand, O‘zbekiston; e-mail: ________; ORCID: ________.

In English

Baxtiyor Q. Sayfullayev — Doctor of Historical Sciences, Professor, Leading Researcher, Y. Ghulomov Samarkand Institute of Archaeology, Samarkand, Uzbekistan; e-mail: ________; ORCID: ________.

The following information must be provided for each author:

  • full name;
  • academic degree;
  • academic title;
  • position;
  • full name of the institution;
  • city and country;
  • email address;
  • ORCID;
  • corresponding-author status.
  1. Abstract

The abstract must be original, informative and comprehensible without reference to the full text of the article.

The recommended length of the abstract is 150–200 words, approximately 800–1,500 characters including spaces.

The abstract must include:

  • the subject of the research;
  • the geographical and chronological scope;
  • the aim of the research;
  • a description of the materials used;
  • the methods applied;
  • the principal results;
  • the scholarly novelty;
  • the main conclusions.

The abstract should not:

  • repeat the article title;
  • use general or vague phrases;
  • begin with the words “the author examines…”;
  • provide an extensive historiographical review;
  • include bibliographic references;
  • list the titles of previously published works;
  • use abbreviations without explanation;
  • present information that is absent from the main text.

Abstracts are submitted in Uzbek, Russian and English and must be identical in content.

Machine translation that has not subsequently undergone professional editing is not accepted.

  1. Keywords

Each abstract is followed by five to ten keywords or key phrases.

The keywords must reflect:

  • the region;
  • the archaeological site;
  • the chronological period;
  • the archaeological culture;
  • the subject of the research;
  • the methods used;
  • specialist terminology.

Example:

Keywords: Samarkand, Afrasiab, Early Middle Ages, urban topography, fortification, ceramic assemblage, stratigraphy

Keywords are arranged in order of significance rather than alphabetically. They are separated by commas. No full stop is placed at the end of the list.

Where possible, the keywords should not repeat verbatim all the words already used in the article title.

  1. Length of Materials

“Research and Publications” section

Length: 15,000–40,000 characters including spaces, including abstracts, the reference list, tables and figure captions.

No more than ten illustrations or tables are permitted.

“Discussions” section

Length: 5,000–15,000 characters including spaces.

No more than five to eight illustrations or tables are permitted.

“Reviews and Bibliography” section

Length: 15,000–20,000 characters including spaces.

One illustration is permitted.

When preparing a bibliography of an individual scholar, it is recommended to include no more than 20–25 of the most significant works.

“Chronicle” section

Length: no more than 15,000 characters including spaces.

No more than two or three illustrations are permitted.

The editorial office may accept a longer manuscript for consideration if this is justified by the nature of the archaeological materials being published.

  1. Main Text of the Article

The following structure is recommended for research articles:

Introduction

The Introduction substantiates the relevance of the topic, the state of research on the problem, and the aim and objectives of the study.

Materials and Methods

This section describes the sources, the provenance of the materials, the conditions under which field or laboratory studies were conducted, the methods applied and the criteria for analysis.

Results

The data obtained are presented without unjustified repetition or excessive historiographical digressions.

Discussion

The results are compared with previously published materials, and their significance for addressing the stated research problem is explained.

Conclusion

The principal results, conclusions and prospects for further research are formulated.

The titles and number of sections may vary depending on the nature of the article.

  1. Use of Artificial Intelligence

Artificial intelligence tools may not be named as authors or co-authors of an article.

If artificial intelligence tools were used in preparing the manuscript, the author must specify:

  • the exact name of the tool;
  • its version or the date of use;
  • the developer;
  • the specific purpose for which it was used;
  • the part of the manuscript in which the tool was used;
  • how the author verified the output obtained.

This information is placed in the “Materials and Methods” section or in a separate statement before the reference list.

Sample

Use of artificial intelligence. In preparing the English-language abstract, the ________ tool, version ________, was used to check grammar and style. The authors independently conducted the scholarly analysis, interpreted the materials and formulated the conclusions of the study.

Artificial intelligence may not be used:

  • to create fictitious sources and references;
  • to replace independent scholarly analysis;
  • to fabricate or alter research data;
  • to conceal plagiarism;
  • to prepare false archaeological images or reconstructions without appropriate disclosure.

Undisclosed use of artificial intelligence may constitute grounds for returning the manuscript for revision or rejecting it.

  1. Technical Formatting of the Text

Recommended parameters:

  • page size — A4;
  • margins — 2 cm;
  • font — Times New Roman;
  • main text size — 12 pt;
  • line spacing — 1.0 or 1.15;
  • first-line indent — 1.25 cm;
  • alignment — justified;
  • automatic hyphenation must be disabled.

The following are not permitted:

  • using tabs to create paragraph indents;
  • separating paragraphs with blank lines;
  • inserting multiple consecutive spaces;
  • using expanded character spacing to emphasise words;
  • using macros;
  • saving the file as a template;
  • setting the file to “read-only” mode;
  • using manual line breaks within a paragraph;
  • creating the bibliography as an image;
  • using automatic footnotes for ordinary bibliographic references.

All units of measurement must comply with the International System of Units (SI).

  1. Abbreviations

Generally accepted abbreviations must be used consistently:

  • figure — fig.;
  • table — tab.;
  • page — p.;
  • century — c.;
  • centuries — cc.;
  • year — yr.;
  • years — yrs.;
  • Before Common Era — BCE;
  • Common Era — CE.

Abbreviations for units of measurement are written without a full stop and are separated from the number by a space:

100 km; 25 m; 12 cm; 5 g; 24 m².

Special abbreviations must be defined at first use and included in a list of abbreviations at the end of the article.

  1. Footnotes and Notes

Bibliographic references are formatted in the body of the text rather than in automatic page footnotes.

Footnotes are permitted only for:

  • indicating a grant or government assignment;
  • a brief textual or philological explanation;
  • clarifying an archival reference code;
  • a comment that cannot be incorporated naturally into the main text.

Footnotes must not contain extended bibliographic descriptions.

  1. Formatting Numbers

In English text, the decimal part of a number is separated by a full stop:

3.5 cm; 12.7%; 0.25 g.

Numbers up to 9,999 are written without a separating space:

3583; 7925.

Numbers of 10,000 and above are separated by spaces:

15 679; 250 000; 2 700 000.

A space is inserted between a numerical value and a unit of measurement:

10 km; 25 °C; 150 g.

Ranges are indicated by an en dash:

15–20 cm; 2020–2025; ninth–eleventh centuries.

  1. Chronology and Dating

Centuries are indicated by Roman numerals and years by Arabic numerals:

fourth–third centuries BCE; seventh–eighth centuries CE; 2024–2026.

The following abbreviations are recommended:

  • BCE;
  • CE;
  • BP;
  • cal BCE;
  • cal CE.

Chronological intervals are stated from the earlier date to the later date:

fourth–second centuries BCE;

40,000–30,000 BP.

Full calendar dates must be formatted consistently:

6 December 2022

or in numerical format:

06.12.2022.

A single format for full dates must be used throughout an article.

  1. Radiocarbon Dates

For each radiocarbon date, the following must be specified:

  • the measured value;
  • the standard deviation;
  • the laboratory code;
  • the sample material;
  • the dating method;
  • whether the value is calibrated or uncalibrated;
  • the calibration curve and software used;
  • the confidence interval.

Example of an uncalibrated date

927 ± 18 BP (laboratory code), wheat grain, AMS ^14C.

Example of a calibrated date

1047–1160 CE, 2σ, 95.4%, IntCal20.

Where both calibrated and uncalibrated values are used in one article, they must be clearly distinguished in every instance.

For a series of radiocarbon determinations, it is recommended that the results be presented in a table.

  1. Illustrations

As a rule, the number of illustrations and tables in an article must not exceed ten.

Illustrations must be submitted as separate files and must not be provided only as images embedded in a Word document.

Accepted formats:

  • photographs — TIFF or JPEG;
  • drawings and diagrams — TIFF, EPS, AI or PDF;
  • maps — TIFF, EPS, AI or PDF;
  • graphs — the original Excel file and an exported image.

Technical requirements:

  • colour model — RGB;
  • photograph resolution — at least 300 dpi;
  • resolution of drawings and images with fine details — at least 600 dpi;
  • images must be clear and have adequate contrast;
  • labels and numbers must be created electronically;
  • photographs of objects and drawings must include a scale;
  • maps must indicate scale and north direction.

Files are named according to the illustration number:

Fig_1.tif; Fig_2.jpg; Table_1.xlsx.

Every illustration must be referred to in the text.

Examples

(fig. 1);

(fig. 2: 1–3);

(fig. 3: 2; fig. 4: 1);

(table 1).

The first number indicates the figure number; the number after the colon indicates the number of an individual object or image within the figure.

  1. Figure Captions

Captions to illustrations are provided as a separate list after the article text.

Example

Fig. 1. Plan of the settlement: 1 — citadel; 2 — shahristan; 3 — rabad.

Fig. 2. Ceramic vessels from Trench 3: 1–4 — rims; 5–7 — bases; 8 — vessel handle.

If an illustration has been reproduced from another source, the source must be indicated:

Fig. 3. Plan of the Kyzlartepa site, after A. A. Raimkulov, with modifications by the author.

If the figure was prepared by the author:

Fig. 4. Drawing by B. K. Saifullaev.

  1. Tables

Each table must:

  • have a sequential number;
  • have a concise and informative title;
  • be cited in the text;
  • include explanations of abbreviations;
  • not duplicate the main text in full.

Example:

Table 1. Radiocarbon dates of archaeological complexes at Afrasiab

Tables are created using Word or Excel. If a table contains photographs or drawings, these materials must also be submitted as separate files.

  1. In-Text Bibliographic References

References to literature and sources are given in parentheses.

The following are specified:

  • the author’s surname;
  • the year of publication;
  • the specific page;
  • where necessary, the figure, table or object number.

One author

(Askarov, 1973, pp. 3–5).

(Reutova, 2020, pp. 39–40).

Two authors

(Manylov and Yagodin, 1964).

(Avanesova and Ippolitova, 2016, pp. 106–108).

Three or more authors

At first mention, all authors may be listed:

(Ilyasova, Sheiko and Ilyasov, 2016, pp. 121–122).

In subsequent references:

(Ilyasova et al., 2016, p. 125).

Collective work without an individual author

(On the Historical Topography…, 1981, pp. 10–12).

(Horse and Rider…, 2003, p. 45).

Several publications

(Askarov, 1973, p. 15; Pletneva, 1967, pp. 47–49; Sagdullayev, 2007, pp. 17–18).

Reference to a figure or table in a publication

(Sharakhimov, 1981, p. 61, fig. 5: 2).

(Ilyasova et al., 2016, p. 124, table 2).

When citing a specific statement, page numbers must be provided.

  1. Bibliography and References

The bibliography includes only sources and publications cited in the text. Every in-text reference must have a corresponding bibliographic entry.

Two interrelated bibliographic sections are provided at the end of the article:

1) “Bibliography” — bibliographic entries in the original language and script;

2) References — the same list of sources, fully rendered in Roman script for international bibliographic and abstracting databases.

In the References section, Russian-language sources are transliterated in accordance with GOST 7.79-2000 (System B). Uzbek sources are provided in the official Latin script. Sources in other non-Roman scripts are formatted according to the relevant international transliteration standard, applied consistently throughout the article.

After the transliterated title of a publication, an English translation of the title should be provided in square brackets. The language of the original is indicated at the end of the entry: (in Russian), (in Uzbek), etc.

Where available, a DOI must be provided for every source in the format https://doi.org/… . If no DOI is available, a persistent URL of the official source may be given.

The lists are arranged alphabetically. In the main bibliography, publications in Cyrillic are listed first, followed by publications in Roman script. The References section must correspond to the main bibliography in its composition of sources.

The recommended length of the list is no more than 50 entries. References to the author’s or authors’ own publications must not exceed 25%, unless a higher proportion is justified by the subject of the research.

  1. Examples of Bibliographic Entries

Monograph

In-text reference:

(Askarov, 1973, pp. 3–5).

In the bibliography:

Аскаров А. А. Сапаллитепе. Ташкент: Фан, 1973. 172 с.

Monograph in a scholarly series

In-text reference:

(Pletneva, 1967, pp. 47–49).

In the bibliography:

Плетнева С. А. От кочевий к городам // Материалы и исследования по археологии СССР. № 142. Москва: Наука, 1967. 198 с.

Collective monograph

In-text reference:

(On the Historical Topography…, 1981, pp. 10–12).

In the bibliography:

К исторической топографии древнего и средневекового Самарканда / отв. ред. Ю. Ф. Буряков. Ташкент: Фан, 1981. 144 с.

Chapter in a collective monograph

In-text reference:

(Sharakhimov, 1981, pp. 61–70).

In the bibliography:

Шарахимов Ш. Ш. Квартал гончаров X — начала XI в. // К исторической топографии древнего и средневекового Самарканда / отв. ред. Ю. Ф. Буряков. Ташкент: Фан, 1981. С. 60–103.

Chapter in a multivolume publication

In-text reference:

(Nerazik, 1999, pp. 30–32).

In the bibliography:

Неразик Е. Е. Хорезм в IV–VIII вв. // Средняя Азия и Дальний Восток в эпоху Средневековья. Средняя Азия в раннем Средневековье / отв. ред. Г. А. Брыкина. Москва: Наука, 1999. Т. 20. С. 30–49.

Article in a continuing publication

In-text reference:

(Atakhodjaev, 2020, pp. 332–333).

In the bibliography:

Атаходжаев А. Х. Денежное обращение и чудеса Хорезма // История и археология Турана. Вып. 5 / отв. ред. Ф. А. Максудов. Самарканд, 2020. С. 332–355.

Article in a scholarly journal

In-text reference:

(Reutova, 2020, pp. 39–40).

In the bibliography:

Реутова М. А. Из опыта консервации археологических материалов из необожжённой глины // Археология Узбекистана. 2020. № 1 (20). С. 39–46.

Multi-authored article

In-text reference:

(Ilyasova et al., 2016, pp. 121–122).

In the bibliography:

Ильясова С. Р., Шейко К. А., Ильясов Дж. Я. Комплекс неглазурованной керамики X–XI вв. с городища Канка // История материальной культуры Узбекистана. Вып. 39. Самарканд, 2016. С. 121–136.

Article in an edited collection

In-text reference:

(Ranov, 1977, pp. 9–10).

In the bibliography:

Ранов В. А. Освоение Высокой Азии человеком каменного века: на примере гор Средней Азии // Средняя Азия в древности и Средневековье: история и культура / отв. ред. Б. Г. Гафуров, Б. А. Литвинский. Москва: Наука, 1977. С. 9–14.

Conference proceedings

In-text reference:

(Sagdullayev, 2007, pp. 17–18).

In the bibliography:

Сагдуллаев А. С. Самарканд в системе древней урбанизации // Роль города Самарканда в истории мирового культурного развития: материалы Международного научного симпозиума, посвящённого 2750-летию Самарканда / отв. ред. Т. Ш. Ширинов, Ш. Р. Пидаев. Ташкент–Самарканд: Фан, 2007. С. 17–19.

Field report

In-text reference:

(Manylov and Yagodin, 1964).

In the bibliography:

Манылов Ю. П., Ягодин В. Н. Археологические разведки на возвышенности Терменбес // Научный отчёт Терменбесского археологического отряда. Нукус, 1964. Научный архив Сектора археологии Института истории, языка и литературы имени Н. Давкараева Каракалпакского филиала АН Республики Узбекистан. Ф. II. Оп. I. Д. 6.

Dissertation abstract

In-text reference:

(Abdullayev, 2007, pp. 5–6).

In the bibliography:

Абдуллаев Б. М. Возникновение и этапы развития фортификации Ферганы в древности и Средневековье: конец II тыс. до н. э. — начало II тыс. н. э.: автореф. дис. … канд. ист. наук. Самарканд, 2007. 29 с.

Exhibition catalogue

In-text reference:

(Horse and Rider…, 2003, p. 45).

In the bibliography:

Конь и всадник. Взгляд сквозь века: каталог выставки Государственного исторического музея, 21 марта — 29 сентября 2003 г. / ред. М. А. Наумова. Москва, 2003. 64 с.

Electronic resource with a DOI

In-text reference:

(Polosmak, 2021, p. 95).

In the bibliography:

Полосьмак Н. В. Пазырыкский стиль // Археология, этнография и антропология Евразии. 2021. Т. 49. № 4. С. 95–106. DOI: 10.17746/1563-0102.2021.49.4.043-056.

  1. Acknowledgements and Funding

Before the bibliography, the author names the organisations and specialists who assisted in conducting the research.

Example

Acknowledgements. The author thanks the staff of the Y. Ghulomov Samarkand Institute of Archaeology for their assistance in processing the archaeological materials.

Where funding was received

Funding. The research was carried out within Project No. ________, funded by ________.

Where no funding was received

Funding. The research received no specific funding.

  1. Author Contributions

For an article with several authors, it is recommended that each participant’s contribution be specified in accordance with the CRediT taxonomy.

Example

Author contributions: B. K. Saifullaev — research concept, methodology, analysis of materials and preparation of the initial draft; A. Kh. Atakhodjaev — processing of numismatic material and editing; M. A. Reutova — conservation of finds and preparation of illustrations.

All authors must review the final version of the article and approve its submission to the journal.

  1. Conflict of Interest

One of the following statements is placed before the bibliography:

Conflict of interest. The author declares that there is no conflict of interest.

or:

Conflict of interest. The author reports the following potential conflict of interest: ________.

  1. Manuscript Consideration

A submitted article undergoes:

  1. technical screening;
  2. a check for conformity with the journal’s scope;
  3. an originality check;
  4. scholarly peer review;
  5. consideration by the Editorial Board;
  6. scholarly and language editing;
  7. author’s proof correction.

The editorial office may ask the author to:

  • shorten or supplement the text;
  • revise the article structure;
  • clarify references and bibliographic entries;
  • replace illustrations of inadequate quality;
  • provide additional information on materials and methods;
  • disclose the use of artificial intelligence;
  • remedy breaches of publication ethics.

Acceptance of a manuscript for consideration does not constitute an obligation on the part of the editorial office to publish it.

  1. Final Provision

By submitting an article to O‘zbekiston arxeologiyasi, the author confirms that they have read and agree to:

  • these Guidelines for Authors;
  • the editorial policy;
  • the publication ethics policy;
  • the peer-review procedure;
  • the policy on the use of artificial intelligence;
  • the copyright and open-access policy;
  • the terms of the Licence Agreement.

Manuscripts and illustrations prepared without compliance with the established requirements are returned to the author for revision.

This version uses a single citation system (author, year, page) and removes the inconsistency in the previous version, in which references were proposed to be formatted in square brackets.